Skip to content
GuideReports and tests

Why two labs show different normal ranges

By Curelane teamPublished on 4 November 20263 min read

The short answer

Each lab sets its own normal range for its own machines, methods and the people it tests, and some labs use different units. So the same blood can get a different number, or the same number a different flag. Compare each result with the range on its own report, put both in the same unit, and stick to one lab when you can.

You get a test done at one lab, then repeat it at another, and the numbers or the normal ranges do not match. Usually nothing is wrong. The labs are just measuring and reporting in different ways.

Why does each lab have its own range?

A lab’s normal range, often printed as “Bio. Ref. Interval”, comes from testing healthy people with its own machines and methods. Lab quality guidance from the World Health Organization (WHO), the United Nations’ health agency, expects each lab to set or check its own range. The range should suit the people the lab serves.

So two good labs can print slightly different ranges for the same test. Two things cause most of the difference:

  • Machines and methods. Different equipment and chemicals can give slightly different numbers from the same blood.
  • The people tested. A range built on one group of people can differ a little from one built on another.

That is why a number can be normal at one lab and flagged at another.

Do Indian labs use Indian ranges?

Not always. Many ranges in common use came from studies abroad. A study of 10,665 healthy Indian adults found that several Indian ranges differ from them, including haemoglobin, platelets, fasting sugar and cholesterol. For platelets, the healthy lower limit was 1.3 lakh, below the 1.5 lakh many reports print. Our CBC page shows the Indian ranges.

Why do units differ?

Some labs report the same test in different units. Indian labs mostly use mg/dL, but you will see other units, especially on reports from abroad or from some hospitals.

Test Units you may see To convert
Blood sugar (glucose) mg/dL or mmol/L mmol/L × 18 = mg/dL
Cholesterol (total, LDL the harmful kind, HDL the good kind) mg/dL or mmol/L mmol/L × 38.7 = mg/dL
Triglycerides mg/dL or mmol/L mmol/L × 88.6 = mg/dL
Creatinine (a kidney test) mg/dL or µmol/L µmol/L ÷ 88.4 = mg/dL
Vitamin D ng/mL or nmol/L nmol/L ÷ 2.5 = ng/mL
HbA1c (average sugar over about three months) % or mmol/mol % × 10.93 − 23.5 = mmol/mol*

* HbA1c formula from the National Glycohemoglobin Standardization Program (NGSP), the body that standardises HbA1c tests. So 6.5% is about 48 mmol/mol.

So a fasting sugar of 5.5 mmol/L is the same as about 99 mg/dL. A vitamin D of 75 nmol/L is the same as 30 ng/mL.

How do you compare two reports properly?

  1. Check the unit on each line. Convert so both are in the same unit.
  2. Read each result against its own range. Ask whether it is in, near the edge of, or outside that lab’s range.
  3. Look at the direction. Has it moved up or down, and by a little or a lot?
  4. Tell your doctor that the lab changed. They will allow for it when they read the numbers.

Curelane reads the unit and range on every report and lines up the same test across labs for you. See the trend line

When is a difference real?

A difference between labs is usually small. Be more careful when:

  • The number moved a lot, not just a little
  • It keeps moving in the same direction over several reports
  • It went from inside the range to well outside it
  • You have new symptoms

In any of these cases, show both reports to your doctor. They may repeat the test, ideally at the same lab.

The simplest fix

Use one lab for your regular tests when you can, and keep every report together with its date. In Curelane, every report lands on one timeline, whichever lab it came from. With one lab and a clear timeline, a change on your report is a change in you.

When to see a doctor

  • A result is normal at one lab and flagged at another, and you are not sure which to trust.
  • You switched labs and a number moved a lot between two reports.
Share with family on WhatsApp

Questions people ask

Which lab's range is right?

Both, for their own tests. A range only applies to the lab that set it, so read each result against the range printed on its own report.

Can I compare my old report with my new one if the labs are different?

Yes, with care. Put both results in the same unit, see where each sits within its own range, and tell your doctor that the lab changed.

Why is my vitamin D 30 at one lab and 75 at another?

Probably the units. One lab may report in ng/mL and the other in nmol/L. 30 ng/mL is about 75 nmol/L, so the two results are the same.

Should I always use the same lab?

When you can, yes. Then a change between reports is about you, not about the lab.

How is this guide?

Spotted something wrong or unclear? Report an issue

Sources

  1. Laboratory reference ranges, MSD Manual, Professional Version
  2. How to understand your lab results, MedlinePlus, US National Library of Medicine
  3. Document biological reference intervals and decision values for all examinations performed, WHO Laboratory Quality Stepwise Implementation tool
  4. Hematological and biochemical parameters in apparently healthy Indian population: defining reference intervals, Sairam and colleagues, Indian Journal of Clinical Biochemistry, 2014
  5. IFCC and NGSP HbA1c conversion, National Glycohemoglobin Standardization Program

This guide is for information. It does not replace advice from your doctor.

See every report on one trend line.

Curelane reads your reports from any lab, keeps the units straight and shows how each number moves over time.

Who are you joining for?

We use these details only for your beta invite and, if you’re joining for your parents, to set up their care. Privacy Policy